Pool Equipment
Best Above Ground Pool Pumps of 2022
Many pool owners tend to overlook the most vital component of keeping your above-ground pool circulating in optimum condition all summer long. Pool pumps for above-ground pools are a different breed than their inground counterparts but the same principle applies to both. The water and chemicals must be circulated throughout the vessel in order to filtrate impurities and keep the pool crystal clear. Without a quality above-ground pool pump, you’re apt to spend an inordinate amount of time trying to keep the pool clean instead of actually enjoying it.
The best above-ground pool pumps have the ability to efficiently circulate the water and help you keep your pool free without constant maintenance. When considering which pool pump to purchase you need to consider several important factors; the warranty and lifespan of the span, the brand, and the features of the pump that you’re buying.
Pool Magazine is here to make your job of picking out the best above-ground pool pump that much easier. We’ll discuss single speed, dual speed, and variable speed pumps as well as discuss the various sizes, voltage, and horsepower of pumps.
Best Above Ground Pool Pumps of 2022
Hayward PowerFlo VS 300 | Pentair OptiFlo | Hayward® Super Pump® |
Best Variable Speed Above Ground Pool Pump | Best Pump For Larger Above Ground Pools | Best Single Speed Above Ground Pool Pump |
Editor’s Pick | Contractor’s Pick | Contractor’s Pick |
Price: $$$ | Price: $$$$ | Price: $$$ |
The Krystal Clear™ Sand Filter Pump | Black & Decker Above Ground Variable Speed Pump | Xtremepower 1.5 HP Above Ground Pool Pump |
Best Budget-Friendly Above Ground Pump | Best New Comer Variable Speed Above Ground Pool Pump | Best Value Above Ground Pool Pump |
Consumer’s Pick | Contractor’s Pick | Editor’s Pick |
Price: $$ | Price: $$$ | Price: $$$ |
Happybuy 2.5HP 1850W Above Ground Powerful Filter Pump | VIVOHOME 2.0 HP Above Ground Pool Pump with Strainer Basket | Bestway 58392E Flowclear 2,500 Pool Filter Pump |
Best Rated New Comer Above Ground Pool Pump | Best New Comer Value Above Ground Pool Pump | Best Performance Entry Level Pool Pump |
Editor’s Pick | Contractor’s Pick | Consumer’s Pick |
Price: $$ | Price: $$ | Price: $ |
Best Variable Speed Above Ground Pool Pump
Hayward PowerFlo VS 300
The PowerFlo VS 300 is an above-ground variable-speed pool pump that is more energy-efficient and quieter than ever.
The PowerFlo VS 300 above ground pool pump saves up to 80% more energy than single-speed pumps and pays for itself in less than two seasons of use.
- The Hayward PowerFlo LX Single-Speed 1.5 HP Pool Pump is ideal for the rigors of above-ground pools
- Heavy-duty motor offers dependable performance, energy efficiency and quiet operation
- Durable, corrosion-proof housing for all-weather performance and quiet operation
- Extra-large debris basket with clear cover keeps pool maintenance to a minimum
- Drain plug provides easy maintenance of pump
Best Pump for Larger Above Ground Pools
Pentair OptiFlo
The unique design of OptiFlo pumps for aboveground pools ensures consistent high flow performance. The OptiFlo pump has a 48-frame-thru bolt motor, quick access to alter the discharge port position and service the impeller, and a unique Cam and Ramp cover. The OptiFlo pump comes with a 3 ft. cord and either a twist lock or a standard plug. Models in the OptiFlo series now conform with new Department of Energy (DOE) rules for energy efficiency standards.
- Proprietary Totally Enclosed Fan-Cooled (TEFC) motor available on updated models
- Large strainer basket
- Cam and Ramp™ Lid lock
- Unionized discharge port connection
- DOE compliant models available
Best Single Speed Above Ground Pool Pump
Hayward® Super Pump®
Hayward® Super Pump® continues to set the industry standard for quality and value, and the new Super Pump XE is no exception. Super Pump XE is the ideal pump for almost any pool, providing energy efficiency that exceeds Department of Energy criteria while reducing pump equipment expenses by nearly a third. It’s the most versatile way to unbeatable value, with quick and easy installation and dual-voltage capability.
- The Hayward Super Pump Single-Speed 1.5 Pool Pump sets the industry standard for efficiency and dependability and is part of the world’s best-selling medium-head pump family
- Heavy-duty, high-performance motor and airflow ventilation provide quieter, cooler, more efficient operation
- Extra-large debris basket provides added leaf-holding capacity for less frequent maintenance
- Exclusive swing-away hand knobs make for easy strainer cover removal without tools
- Unique service-ease design offers quick 4-bolt access to all internal components for simple servicing
Best Budget-Friendly Above Ground Pool Pump
The Krystal Clear™ Sand Filter Pump
The Krystal Clear™ Sand Filter Pump from Intex® keeps your above-ground pool water clean, soft, and refreshing. The sand provides great water filtration, and the 6-function control valve allows the pool owner to filter, backwash and rinse, recirculate, drain, and shut down the system. A flow rate of 3,000 gallons per hour, makes it suitable for above-ground pools. Except for sand change every 5 years, this pump requires almost no maintenance.
- Benefits include:
- Improved circulation and filtration
- Improved water clarity
- Increased negative ions at the water surface
- Specifically designed for above ground pools
- Pump Flow Rate: 3,000 gph (11.3 m3/hr)
- System Flow Rate: 2,450 gph (9.2 m3/hr)
- Six functions : filter, backwash, rinse, re-circulate, drain and close system
- 24-hour timer with 2 to 12 hour pre-set cycles for automatic operation
- Includes two 1.5in (38mm) connector hoses
- Built-in ground fault circuit interpreter (GFCI)
- Meets UL/CSA standards
- 2 Years Limited Manufacturer’s warranty
Best New Comer – Variable Speed Above Ground Pool Pump
BLACK+DECKER Above Ground Variable Speed Swimming Pool Pump, 1 HP
This genuinely adaptable device enables slower filtering for a more quiet, consistent, and thorough job—all while saving a significant amount of money. Controls for all warmers, cleaners, salt systems, and even waterfalls are included. This pump runs cool, keeps dry, and is made to last thanks to permanent magnet technology and an enclosed construction.
This pump’s horsepower is tailored for the shape and size of above-ground pools, and it not only turns over water at an ultra-efficient rate—it also helps you save money on your monthly energy bill.
Backed with guaranteed servicing, rebate eligibility, and craftsmanship from one of the world’s most reputable manufacturers.
- Variable Speed Motor
- Energy Star Certified to Cut Energy Costs
- 3-Year Warranty Included
- 3 Speed Options for Thorough Filtration
- Permanent Magnet Synchronous Motor to Increase Efficiency
- Exclusive Self-Diagnostics to Keep Performance High
- Easy Programming Touch Pad for Optimal Speeds
- Quiet Motor and Cooler Operation to Last
- Enclosed Unit with Clear, Easy-to-Open Lid to Protect Motor Year Round
- Consumer-Friendly Installation
- Dual-Port Housing Fits Horizontal and Vertical Designs
- Common Sense Design to Fit Most Plumbing
- Accommodates Equipment New & Aftermarket
- Voltage: 110V
- Port Size: Both 1.5″ and 2″ are in packaging
Best Value Above Ground Pool Pump
Xtremepower US 1.5 HP Self Priming Above Ground Swimming Pool Pump 1.5″ NPT With Strainer Basket
The strong above-ground pumps are made of corrosion-resistant polymer and will provide years of dependable operation. This high-performance pump is whisper-quiet, energy-efficient, and self-priming. The top discharge design is compatible with most filters, and the extra big clear lid allows for easy cleaning. This water flowing dynamo will replace your old ineffective pump.
- This high performance pump is quiet, efficient and self priming
- Pump components are fiberglass-reinforced for superior strength and durability
- Machine will protect users’s safety entirely with build-in automatic thermal overload protector
- Inlet Internal Fitting: 1.5″ Max Water Temp: 122 F; Water Flow: 4900GPH; Amps:3.2
- 2pc-Union Fitting Sold Separately (ASIN: B01FNEQ96G and B01FNEQ96G) These pumps are capacitor start and not for use/sale in California
Best Rated New Comer – Above Ground Pool Pump
Happybuy 2.5HP 8880 GPH Swimming Pool Pump,1850W Above Ground Powerful Filter Pump
Cleaning, filtration, and chlorine/salt distribution are all handled by the New SPPE Series 1850W Electric Swimming Pool Pump. It has a revolutionary removable strainer basket with built-in thermal overload protection – as the water circulates and goes through the filter, it cleans your pool of leaves, hair strands, trash, and other contaminants.
- High-Quality Material: The SPPE pump is constructed with longevity in mind and employs extensive use of corrosion-proof materials for durability.
- 2.5HP Electric Motor: The swimming pool features powerful super-efficient IP55 1850W 2.5HP Electric Motor. Suitable for pools up to 100,000 liters.
- Stable Performance: Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. The fine filter basket ensures debris does not enter the pump, ensuring trouble-free operation and extended life of filter sand.
- Security Protection: The self-priming automatic pump has a built-in thermal protector and provides automatic pressure protection. Long-life pump with quiet operation without leaking.
Best Rated New Comer – Value – Above Ground Pool Pump
VIVOHOME 2.0 HP Above Ground Swimming Pool Pump with Strainer Basket
The VIVOHOME swimming pool pump is constructed of a long-lasting PP plastic shell and a stainless motor that delivers high-performance suction power and excellent flow. This pool pump runs very smoothly and quietly. Its airflow ventilation aids in the circulation of water filtration and maintains your pool clean and sanitary. Ideal for all types and sizes of above-ground pools and spas.
- BEFORE YOU BUY – Please be aware that this item is not available for use or sale in the state of California due to motor limitation required by CEC
- POWERFUL PUMP – Advanced engineering features an impeller that maximizes flow, minimizes noise, and self-primes in an energy-efficient manner; Copper wire motor provides not only a more efficient, stable, and safer running, but also longer service life compared with common motor
- STURDY CONSTRUCTION – The full body is constructed with commercial-grade reinforced thermoplastic that resists corrosion, ensuring superior strength and durability; Comply with UL Safety Standard
- DETAIL ORIENTED – The strainer is designed with an extra-large filter basket that is detachable for easy cleaning; See -through lid allows you a clear internal viewing; Built-in automatic thermal overload protector and airflow ventilation protects from overheating and damage; Note: Please fill the pump with water upon first use to prevent the motor from overheating
- WIDE APPLICATIONS – Female and slip union connection for tool-free installation; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation system, but should not be used with storable pools; Package includes: 1 x pool pump; 2 x black interface, 1 x manual
Best Performance Entry Level Pool Pump
Bestway 58392E Flowclear 2,500 Pool Filter Pump, 2500 Gal
For basic filtration and circulation purposes, many consumers will opt for an entry-level pool pump. Using this Bestway Flowclear 2,500 Gallon Filter Pump, you can keep clean water circulating around your pool. This device will aid in keeping water clean during the summer months. The Bestway Flowclear filtration pump circulates the water by pumping it out of the pool, through a filter cartridge, and back again. Two hoses are included and connect to two different spots on the pool.
One hose’s loose end is linked to an inlet on the pool filtration pump, while the other hose’s loose end is plugged into an outlet. At a rate of 2,500 gallons per hour, water is pumped out of the pool and via the intake line before being cleaned by the filter cartridge and pumped back through the output hose. It then restarts its trip, giving clean, clear, sanitary water.
- Provides clean, clear, hygienic water all summer long
- Simple set-up process
- Easy to operate
- Recommended for use with 300-15, 200 gal pools
Consider the Following When Choosing the Best Pool Pump
When looking for a new above- or below-ground pool pump, various criteria must be considered, including the pool’s size, material, horsepower, and filter compatibility.
Pool Dimensions
Pool owners must determine the minimum flow rate of a pump in order to acquire the appropriate size pump for the pool volume. The flow rate is expressed in metric gallons per minute and indicates how frequently the pump can filter the full contents of the pool each day. This figure is referred to as the turnover rate. The pump should be powerful enough to turn the pool over at least once a day, preferably twice.
You can either use an online pool pump calculator or perform the calculations manually. Divide the pool capacity by 24, which will give you the number of gallons per hour that a pump would need to circulate for a single day’s circulation.
Horsepower and Voltage
The majority of manufacturers do not advertise their pumps’ capacity in gallons per minute (or hour) because the flow rate is determined by elements other than the pump, such as the size of the piping, the plumbing fittings, the pool filter, and even the elevation of the pump in respect to the pool. All of these factors can cause resistance, reducing the pump’s flow rate; this is most commonly referred to as head resistance.
Pool pumps operate on either 115-volt or 230-volt power supply, with the majority of pumps less than 2 horsepower being capable of operating on either. The majority of household appliances operate on 115 volts, whereas larger appliances, such as electric stoves and clothes dryers, require 230 volts.
“Ensure that you are aware of the power requirements for the pump you plan to purchase.” says pool repair specialists – Fox Pools, “It’s much more difficult to replace an old 115-volt pump with a 230-volt pump or vice versa than it is to install a pool pump that uses the same power source as the old one.”
Hardwired vs. Plug-In
While some pool pumps can be plugged into regular 115-volt outlets, the majority are hardwired into the electrical infrastructure of your home. Keep in mind that if you utilize a plug-in pool pump, the receptacle must be GFCI-protected to avoid electrocution. If the outlet is within ten feet of the pool, it should also be a twist-lock style plug to prevent it from being wrenched out, potentially exposing the outlet to splashes.
Noise Level
When you’re attempting to unwind by the pool, a noisy pump can be a nuisance. Swimming pool pumps operate at a decibel level of 65 to 90, which is comparable to the sound of two persons conversing and a hairdryer. At the low end of this spectrum, the majority of contemporary pumps have designs for quiet operation. Pumps with completely enclosed motors operate quietly, at decibel levels in the 40s—roughly the same as a refrigerator.
Compatibility of Filters
For an inground pool, three types of filters are available: sand, cartridge, and DE (diatomaceous earth). While the majority of pumps are compatible with all filter types, compatibility should be verified prior to purchasing a pump. Additionally, each filter has a maximum flow rate that is determined by the filter type and size. Never operate a pump faster than the maximum flow rate of the filter, otherwise you risk damaging the filter.
Efficient Energy Use
Pool pumps have a wide range of energy efficiency ratings. While a single-speed pump is less expensive initially, variable-speed pumps eventually pay for themselves through energy savings. A variable-speed pump is programmable, allowing you to run it at a slower, more efficient pace during downtimes when the pool is not in use and no cleaning is necessary.
It may be tempting to get a 1.5-horsepower pump that is significantly more powerful than what your pool requires. However, you will pay more in energy expenditures than you would with a smaller pump that is more suited to the size of your pool.
Maintenance
Pool pump maintenance is an integral aspect of routine pool maintenance. A basket filters out hair, lint, and other particles that the poolside skimmer misses as the pump sucks in water. This filter must be cleaned on a regular basis, while some pumps incorporate huge baskets that allow for longer intervals between cleanings. Additionally, after cleaning the pool, you’ll want to clean the pump basket.
Because the pump requires air circulation to avoid overheating, never cover it or put trees or plants around it. Ensure that any air inlets on the pump motor are clean of debris. Cover the pump and motor during the off-season to prevent debris from accumulating on them.
Types of Above Ground Pool Pumps
Single Speed Pumps
Due to the fact that single-speed pool pumps have just one speed, the rate at which they pump water into and out of your pool is fixed. You cannot increase the speed of the pump to boost its cleaning power or decrease it to make it more energy-efficient. Single-speed pool pumps are designed to operate for around eight hours per day and should be capable of turning over the full volume of a pool at least once.
Dual Speed Pumps
A dual-speed pump has two distinct power settings, providing you with two alternative speeds for circulating water in your pool. This enables you to operate at a faster pace when the pool is heavily used and requires additional filtration, or at a lower speed when there is minimal activity. While dual-speed pumps are more expensive than single-speed pumps, they save between 50% and 70% on energy expenditures.
Variable Speed Pumps
A variable-speed pump allows you complete control over the pace of its circulation, allowing for micro-adjustments for best cleaning or energy economy. These pumps come equipped with programmable displays that allow you to adjust the pump speed throughout the day.
While these pumps are the most expensive of the three, their variable speed capability can save you up to 80% or more on energy bills over time. A variable-speed pump may operate at a lower speed 24 hours a day than a single-speed pump, churning over approximately double the amount of water with the same amount of energy.
Featured Photo Credit: Rising Sun Pools & Spas
Equipment Supplies
Hayward Offers Pool Pros Hands-On Training
Hayward’s hands-on training courses empower pool professionals.
In the dynamic world of pool maintenance and equipment, staying ahead of the curve is essential for pool professionals to deliver top-notch services to their clients. Hayward has a clear understanding of the importance of continuous education and has been at the forefront of providing comprehensive training opportunities for pool professionals. Recently they updated the training section of their website, offering an array of hands-on training courses and webinars to enhance the skills of pool professionals.
Hayward Training Courses
Hayward’s hands-on training courses cater to pool professionals seeking expertise across various crucial aspects of pool maintenance. Covering an array of topics, these sessions delve into the intricacies of Hayward’s latest products, ensuring professionals are well-versed in recommending and installing cutting-edge solutions. Specialized training in heaters, automation, salt systems, pumps, infloor systems, and electrical troubleshooting equips participants with the skills needed to address challenges in specific areas. By offering a comprehensive curriculum, Hayward empowers pool professionals to offer knowledgeable expertise to their clients.
Hayward’s dedication to supporting pool professionals is evident in the various programs they offer throughout the country. Here are some of the latest hands-on education opportunities offered by Hayward in the upcoming months. Make sure to visit and bookmark their Training Registration page as an ongoing resource.
Hayward Hands-On Training By Location
Florida
Date: | 02/20/2024 | Time: 08:00AM-5:00PM | |
Topic: | Gas License Prep Class | ||
Location: | Hilton Garden Inn – Tampa Riverview Brandon 4328 Garden Vista Dr Riverview, FL 33578 | ||
Fee: | $275.00 |
Date: | 04/09/2024 | Time: 08:00AM-5:00PM | |
Topic: | Small Footprint gas heater training, AQRS3 and S3OMNI, OmniPL Upgrade Kit, Omni App and account tutorial | ||
Location: | Hilton Garden Inn – Tampa Riverview Brandon 4328 Garden Vista Dr Riverview, FL 33578 | ||
Fee: | $150.00 |
Gulf Coast
Date: | 01/16/2024 | Time: 08:00AM-5:00PM | |
Topic: | Omni Automation Platform, Sanitization, Gas Heaters, New Products | ||
Location: | DoubleTree by Hilton Atlanta/Roswell 1075 Holcomb Bridge Road Roswell, GA 30076 | ||
Fee: | $85.00 |
Date: | 01/18/2024 | Time: 08:00AM-5:00PM | |
Topic: | Omni Automation Platform, Sanitization, Gas Heaters, New Products | ||
Location: | Hilton Knoxville Airport 2001 Alcoa Hwy Alcoa, TN 37701 | ||
Fee: | $85.00 |
Date: | 01/30/2024 | Time: 08:00AM-5:00PM | |
Topic: | Omni Automation Platform, Sanitization, Gas Heaters, New Products | ||
Location: | Embassy Suites by Hilton 2300 Woodcrest Place Birmingham, AL 35209 | ||
Fee: | $85.00 |
Date: | 02/01/2024 | Time: 08:00AM-5:00PM | |
Topic: | Omni Automation Platform, Sanitization, Gas Heaters, New Products | ||
Location: | The Island Resort at Fort Walton Beach 1500 Miracle Strip Parkway SE Fort Walton Beach, Florida 32548 | ||
Fee: | $85.00 |
Mid-Atlantic
Date: | 02/01/2024 | Time: 08:30AM-3:30PM | |
Topic: | Heaters, Automation, Salt | ||
Location: | Seaview Hotel 401 South New York Road Galloway, NJ 08205 | ||
Fee: | $95.00 |
Date: | 02/08/2024 | Time: 08:30AM-3:30PM | |
Topic: | Heaters, Automation, Salt | ||
Location: | Holiday Inn 1750 Sumneytown Pike Kulpsville, PA 19443 | ||
Fee: | $95.00 |
Date: | 02/13/2024 | Time: 08:30AM-3:30PM | |
Topic: | Heaters, Automation, Salt | ||
Location: | Hampton Inn 2000 N Ocean Ave Farmingville, NY 11738 | ||
Fee: | $95.00 |
Date: | 02/20/2024 | Time: 08:30AM-3:30PM | |
Topic: | Heaters, Automation, Salt | ||
Location: | Hilton Garden Inn 242 Highland Park Blvd Wilkes Barre, PA 18702 | ||
Fee: | $95.00 |
Date: | 02/22/2024 | Time: 08:30AM-3:30PM | |
Topic: | Heaters, Automation, Salt | ||
Location: | Best Western Premier 800 East Park Drive Harrisburg, PA 17111 | ||
Fee: | $95.00 |
Date: | 02/27/2024 | Time: 08:30AM-3:30PM | |
Topic: | Heaters, Automation, Salt | ||
Location: | NESPA Foundation 6B S. Gold Drive Trenton, NJ 08691 | ||
Fee: | $95.00 |
Date: | 02/28/2024 | Time: 08:30AM-3:30PM | |
Topic: | Heaters, Automation, Salt | ||
Location: | NESPA Foundation 6B S. Gold Drive Trenton, NJ 08691 | ||
Fee: | $95.00 |
Mid-West
Date: | 01/30/2024 | Time: 08:30AM-4:00PM | |
Topic: | Omni/Salt/Heaters | ||
Location: | 10709 Watson Rd St. Louis, MO 63127 | ||
Fee: | $75.00 |
Date: | 02/06/2024 | Time: 08:30AM-4:00PM | |
Topic: | Automation/Salt/Heaters | ||
Location: | 340 Racetrack Rd Washington,PA 15301 | ||
Fee: | $75.00 |
Date: | 02/08/2024 | Time: 08:30AM-4:00PM | |
Topic: | Automation/Salt/Heaters | ||
Location: | 5051 West Creek Rd Independence,OH 44131 | ||
Fee: | $75.00 |
Date: | 02/15/2024 | Time: 08:30AM-4:00AM | |
Topic: | Automation/Salt/Heaters | ||
Location: | Indianapolis, IN 5255 Noggle Way Indianapolis, IN 46237 | ||
Fee: | $75.00 |
Date: | 02/20/2024 | Time: 08:30AM-4:00PM | |
Topic: | Omni/ AQRS3/ Heaters | ||
Location: | Frankenmuth, MI 425 S Main St Frankenmuth, MI 48734 | ||
Fee: | $75.00 |
Date: | 02/27/2024 | Time: 09:00AM-2:00PM | |
Topic: | Heater teardown class | ||
Location: | Huntington WV TBD Huntington, WV 25701 | ||
Fee: | Free |
Date: | 02/29/2024 | Time: 08:30AM-4:00PM | |
Topic: | NPI / Automation / Salt / Heat | ||
Location: | Northern Kentucky 7373 Turfway Road Florence, KY 41042 | ||
Fee: | $75.00 |
Date: | 03/05/2024 | Time: 08:30AM-4:00PM | |
Topic: | Omni/Salt/Heaters | ||
Location: | Des Moines, IA 1250 Jordan Creek Pkwy West Des Moines, IA 50266 | ||
Fee: | $75.00 |
North East
Date: | 03/12/2024 | Time: 09:00AM-4:00PM | |
Topic: | 2024 New Product Updates Basic Eletricity S3 Salt Chlorination XE Pumps HDF Gas Heaters | ||
Location: | Hilton Garden Inn Tewksbury Andover 4 Highwood Dr Tewksbury, MA 01876 | ||
Fee: | $75.00 |
Date: | 03/13/2024 | Time: 09:00AM-4:00PM | |
Topic: | 2025 New Product Updates Basic Eletricity S3 Salt Chlorination XE Pumps HDF Gas Heaters | ||
Location: | Sheraton Hartford Hotel 1 Bradley International Airport Windsor Locks, CT 06096 | ||
Fee: | $75.00 |
Date: | 03/19/2024 | Time: 09:00AM-4:00PM | |
Topic: | 2026 New Product Updates Basic Eletricity S3 Salt Chlorination XE Pumps HDF Gas Heaters | ||
Location: | Rosebrook Event Center 50 Rosebrook Place Wareham, MA 02571 | ||
Fee: | $75.00 |
Date: | 03/20/2024 | Time: 09:00AM-4:00PM | |
Topic: | 2027 New Product Updates Basic Eletricity S3 Salt Chlorination XE Pumps HDF Gas Heaters | ||
Location: | enVision Hotel & Conference Center Mansfield 31 Hampshire Street Mansfield, MA 02048 | ||
Fee: | $75.00 |
Date: | 03/26/2024 | Time: 09:00AM-4:00PM | |
Topic: | 2028 New Product Updates Basic Eletricity S3 Salt Chlorination XE Pumps HDF Gas Heaters | ||
Location: | Hilton Garden Inn Albany Airport 800 Albany Shaker Rd Albany, NY 12211 | ||
Fee: | $75.00 |
Date: | 03/27/2024 | Time: 09:00AM-4:00PM | |
Topic: | 2029 New Product Updates Basic Eletricity S3 Salt Chlorination XE Pumps HDF Gas Heaters | ||
Location: | Hyatt House 100 Westage Business Center Drive Fishkill, NY 12524 | ||
Fee: | $75.00 |
South Central
Date: | 02/01/2024 | Time: 08:00AM-5:00PM | |
Topic: | Heaters, Automation, Sanitization | ||
Location: | Hilton Garden Inn- Houston Energy Corridor 12245 Katy Freeway Houston, Texas 77079 | ||
Fee: | $100.00 |
Date: | 02/02/2024 | Time: 08:00AM-5:00PM | |
Topic: | Heaters, Automation, Sanitization | ||
Location: | Hilton Garden Inn- Houston Energy Corridor 12245 Katy Freeway Houston, Texas 77079 | ||
Fee: | $100.00 |
Date: | 02/27/2024 | Time: 09:00AM-3:00PM | |
Topic: | HOT – Heaters and Automation | ||
Location: | Hilton Garden Inn- San Antonio the Rim 5730 Rim Pass San Antonio, TX 78257 | ||
Fee: | $100.00 |
Date: | 02/29/2024 | Time: 09:00AM-3:00PM | |
Topic: | HOT – Heaters and Automation | ||
Location: | Hilton Garden Inn, Austin/Cedar Park 13501 Lyndhurst St. Austin, TX 78717 | ||
Fee: | $100.00 |
Southeast
Date: | 01/17/2024 | Time: 08:30AM-3:30PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | Ramada Plaza 1701 S Virgina Dare Trail Kill Devil Hills, NC 27948 | ||
Fee: | $65.00 |
Date: | 01/30/2024 | Time: 08:00AM-4:00PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | Hilton Garden Inn- Savannah Airport 80 Clyde E. Martin Drive Savannah, GA, 31408 | ||
Fee: | $100.00 |
Date: | 02/01/2024 | Time: 08:00AM-4:00PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | Hilton Garden Inn-Charleston Airport 5265 International Blvd. North Charleston, SC, 29418 | ||
Fee: | $100.00 |
Date: | 02/06/2024 | Time: 08:00AM-4:00PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | Hilton Garden Inn- Downtown 1200 Pickens Street Columbia, SC, 29201 | ||
Fee: | $100.00 |
Date: | 02/08/2024 | Time: 08:00AM-4:00PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | Hilton Garden Inn – Greenville 108 Carolina Point Parkway Greenville, SC 29607 | ||
Fee: | $100.00 |
Date: | 02/13/2024 | Time: 08:00AM-4:00PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | Hilton Garden Inn Charlotte-Pineville 425 Towne Centre Blvd Pineville, NC 28134 | ||
Fee: | $100.00 |
Date: | 02/15/2024 | Time: 08:00AM-4:00PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | DoubleTree- Raleigh 2805 Highwoods Blvd Raleigh, NC 27604 | ||
Fee: | $100.00 |
Date: | 02/20/2024 | Time: 08:00AM-4:00PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | DoubleTree- Myrtle Beach 3200 S Ocean Blvd Myrtle Beach, SC 29577 | ||
Fee: | $100.00 |
Date: | 02/22/2024 | Time: 08:00AM-4:00PM | |
Topic: | UHS/UHC Series Heaters, Hayward Electrical Training & Troubleshooting, Omni Automation, AquaRiteS3 Salt | ||
Location: | Embassy Suites- Wilmington 9 Estell Lee Pl Wilmington, NC 28401 | ||
Fee: | $100.00 |
Southwest
Date: | 01/16/2024 | Time: 08:00AM-5:00PM | |
Topic: | Omni/OmniS3, Heaters, HydraPure, Salt | ||
Location: | Fairfield Inn & Suites 355 E Warm Springs Rd Las Vegas, NV 89119 | ||
Fee: | $75.00 |
Date: | 02/06/2024 | Time: 08:00AM-5:00PM | |
Topic: | Omni/OmniS3, Heaters, HydraPure, Salt | ||
Location: | Fairfield Inn & Suites 355 E Warm Springs Rd Las Vegas, NV 89119 | ||
Fee: | $75.00 |
Date: | 02/08/2024 | Time: 08:00AM-3:00PM | |
Topic: | Omni/OmniS3, Heaters,HydraPure, Paramount | ||
Location: | PEP Tempe 1245 W Geneva Dr Tempe, AZ 85282 | ||
Fee: | $75.00 |
Date: | 02/15/2024 | Time: 08:00AM-3:00PM | |
Topic: | Omni/OmniS3, Heaters, Hydrapure, Paramount | ||
Location: | Superior-Mesa 2350 W Broadway Rd Suite 110 Mesa, AZ 85202 | ||
Fee: | $75.00 |
Date: | 02/24/2024 | Time: 08:00AM-3:00PM | |
Topic: | Omni/OmniS3, Heaters, HydraPure, Paramount | ||
Location: | Phx DC 8175 W Buckeye Rd Phoenix, AZ 85043 | ||
Fee: | $75.00 |
Date: | 02/27/2024 | Time: 08:00AM-5:00PM | |
Topic: | Omni/OmniS3, Heaters, HydraPure, Salt | ||
Location: | Courtyard St. George 185 S 1470 E St. George, UT 84790 | ||
Fee: | $75.00 |
West
Date: | 01/16/2024 | Time: 09:00AM-4:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | Holiday Inn Express 1398 East Roseville Parkway Roseville, CA. 95661 | ||
Fee: | $100.00 |
Date: | 01/18/2024 | Time: 09:00AM-4:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | Courtyard Marriott Fremont Silicon Valley 47000 Lakeview Blvd. Freemont, CA | ||
Fee: | $100.00 |
Date: | 01/25/2024 | Time: 09:00AM-4:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | Holiday Inn Express 3001 Buck Owens Blvd Bakersfield, CA 93308 | ||
Fee: | $100.00 |
Date: | 01/31/2024 | Time: 09:00AM-4:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | Hampton Inn 855 Gettysburg Ave Clovis, CA. 93612 | ||
Fee: | $100.00 |
Date: | 02/06/2024 | Time: 09:00AM-4:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | Superior Canoga Park 21320 Deering Court Canoga Park, CA. 91304 | ||
Fee: | $100.00 |
Date: | 02/08/2024 | Time: 09:00AM-4:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | PEP San Fernando 630 Jessie St San Fernando, CA, 91340 | ||
Fee: | $100.00 |
Date: | 02/13/2024 | Time: 09:00AM-3:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | Superior Anaheim 4900 E. Landon Dr. Anaheim, CA. 92807 | ||
Fee: | $100.00 |
Date: | 02/15/2024 | Time: 09:00AM-3:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | PEP Murrieta 41537 Eastman Dr. Murrieta, CA. 92562 | ||
Fee: | $100.00 |
Date: | 02/20/2024 | Time: 09:00AM-3:00PM | |
Topic: | Automation/Heaters & Heat Pumps/Salt/Hydrapure | ||
Location: | SCP San Diego 5648 Copley Dr San Diego, CA. 92111 | ||
Fee: | $100.00 |
Pool Equipment
Help Your Customers Rule the Pool With a Fully Connected Pool
In 2023, the “smart home” concept continues to trend. Homeowners want a more maintenance-free space with automated thermostats, lights, blinds, and more.
However, this concept can also enhance and improve outdoor spaces, and it’s especially appealing to pool owners. With automation in their toolkit, pool professionals can make a splash and make their customers’ lives easier.
Diving into pool pump automation.
Every good story begins with a hero. One of the unsung heroes of the pool industry is variable speed and flow technology. What makes variable speed and flow so notable is its incredible energy efficiency. In fact, with a third-generation IntelliFlo3® Variable Speed and Flow Pump, pool owners can save up to 90%* on energy consumption. With optional onboard relays to provide automated control of two additional pieces of equipment, pool owners can control additional devices like lighting or salt chlorinators.
While options like this are a great solution for small-scale automation, it’s possible to put most of your customer’s pool features on one easy-to-use management system. And when it comes to the pool, homeowners crave peace of mind! They want the ease of knowing their pool is in great hands and utilizing reliable products and technology. Enter automation systems, a more effortless solution to provide pool pros with a bird’s eye view of problems and the ability to troubleshoot in advance, thus increasing efficiency and delivering white glove service that takes the stress off customers.
Helping customers understand their pool equipment pad and how everything works together is essential. Think of a pool as a person; the chemicals you add to the pool water are like white blood cells, attacking germs and keeping the environment clean. Filters take in dirty water, reduce contaminants, and push out cleaner water, like the lungs of the pool. The automation system is a bit like its brain, sending signals to the different body parts to ensure they’re working accordingly.
Automation systems like the IntelliCenter® Pool Control System provide versatile control. Controlling colored lights, water features, and more with an automation system is a breeze! Pool owners can effortlessly set automation schedules, monitor pool and spa status, and check water chemistry.
Using tools like the Pentair Pro app, pool professionals can also remotely monitor their customers’ automation system. With remote monitoring, pool owners can breathe a sigh of relief and enjoy peace of mind knowing their trusted pool service professional can check in and troubleshoot problems anytime, anywhere.
Help your customers RULE THE POOL!
With automation in your arsenal, it’s easy to curate the dreamiest backyard oasis for your customer. Any pool can be transformed from a mundane natatorium to an enchanting water wonderland with connected products.
The ruler of this watery kingdom is your customer – all they’ll need is the Pentair Home app on their smartphone. With this easy-to-use app, pool owners can monitor and control their pool equipment from anywhere in the world. With the Pentair Home app and automation working together, your customers’ lives become easier. Long gone are the days of frustrating pool management, and here to stay is the era of a fully connected, smart pool equipment pad.
With an easy-to-manage lineup of pool equipment, pool owners can make more time for the things that really matter: family, memory-making, and poolside relaxation. By providing them with a reliable and connected pool equipment pad, you help them rule the pool.
To learn more, visit pentair.com/intelliflo3 hub or pentair.com/intellicenterhub.
*Savings based on variable speed pump compared to a single-speed pump running 12 hours per day at an average of $0.16 per kWh in a 20,000-gallon pool. Actual savings may vary based on local utility rates, pool size, pump run time, pump horsepower, pump rpm, plumbing size and length, pump model, service factor, and other hydraulic factors. Individual Weighted Energy Factor (WEF) scores and savings may vary by model.
All indicated Pentair trademarks and logos are property of Pentair. Third-party registered and unregistered trademarks and logos are the property of their respective owners.
Op Editorials
History Of The Pool Cleaner
Now that I am starting to reflect over my past 69 years of active duty as a pool guy. Many of my friends have told me that I have seen a lot of history in our industry and that I need to start writing them down. With this in mind, Joe & Marianne Trusty and Carol Gigliotti of Pool Magazine have asked me to put down some of my pool history that I experienced over my career.
In 1955, my father decided to move his family from Oakland, California to the rich open spaces of Contra Costa County just a few miles away. At this time, there was starting to become a migration from the inter cities to the new suburbs in the country. Much of this was driven by the Post War GI Bill that all of our returning soldiers received after fighting in WWII. The GI Bill basically gave a serviceman low interest government loans to buy a new home.
This migration and the hopes for home ownership created a huge building boom as America started to get back on her feet, post-war. My dad was one of those returning soldiers after fighting in the Pacific Theater and being discharged in Oakland, California. My dad wanted something better for his family and the attraction of moving to the fast-growing suburbs along with being part of the building boom of those suburbs, had an important attraction for my father.
He moved us to a little town that was 15 miles east of Oakland and what seemed like a whole new world. The weather was warm during the summer and a perfect place to not only raise a family in the country but also to start a new business in an almost unheard of industry, the swimming pool industry. Up to this point, only the very wealthy could afford a swimming pool. However, all this was starting to change as young families started to move to the suburbs and they realized that the weather was perfect for a fast-growing family of Baby Boomers. Now with a new home that the GI Bill allowed these young families to buy, there began the development of the front and backyard.
My father was one of the early pioneers who had the vision and the ability to do something about it. He started his pool company just prior to us moving to the little town of Lafayette, California. Little did he know that this little town of 2,500 people at the time was going to become the center of growth of our industry. Now I’m not saying that the pool business started in Lafayette, however, it was at this time in the 50’s that American families all across the country were starting to experience the same revolution of young boomer families wanting to seek a better life by moving to the suburbs and all the lifestyle that came with it. These young families had a lot in common with each other besides many returning from WWII, taking advantage of the GI bill, having several young kids or Baby Boomers along with wanting a better way of life.
As the new neighborhoods or track developments started to spring up everywhere in our area, we started to see more and more families wanting to enjoy their backyards with their growing families and friends. It was at this time the weekend BBQ with your Weber BBQ became one of the most essential tools of anyones backyard. This outdoor California Lifestyle then found itself wanting more as people could afford more.
Enter the backyard swimming pool and all the enjoyment and entertainment that it brought to our families. My dad was on the ground floor of this movement. Back in those days, his swimming pools cost $2,000 all in. Of course it’s all relative when you realize what a gallon of gas costs ($.26) or what those first track homes in the suburbs cost under $10,000 for a 3 and 2 with a garage. The beauty of those starter homes is that the lot size was big enough for a modest 15×30’ pool with a little decking.
Landscape design and construction was very modest. There weren’t too many landscape architects and most were busy designing those large estates that could afford their designs. So the early years of the industry were very modest and builders such as the Anthony Brothers in Southern California catered to those fast-growing suburb homes by selling pools based on the financing more than the ability to build a pool. As Anthony Pools was taking a commanding lead out west, other markets around the country started to boom. Arizona had the Ghiz Family with Paddock of Arizona along with the Asti Family and Shasta Pools. On the East Coast we also saw the Sullivan Pools that all of these building families started to spawn other spin-off pool builders as the demand for owning a backyard swimming pool started to grow.
Prior to the boom in the 1950’s, here in California, there were two major high-end pool builders that were building pools for the rich and famous, Paddock Pools and Landon Pools. These two builders were instrumental in the engineering and mechanical development of swimming pools. Be it the sand and gravel filters that they used or the skim filter that Landon and Paddock used to try and simplify and reduce cost in their pools.
As more and more pools were being built by new pool builders, there became this demand to help invent more and more components to help make the backyard swimming pool more accessible and user-friendly. It was about this time in the 50’s that Anthony Pools helped create the early precast skimmer with a built-in basket outside of the pool. Prior to that there was the lily pad skimmer that was a floating basket that was attached to the lily pad suction plate that bobbed up and down with the water level as water was drawn from a separate suction line. These pools also had a separate main drain suction line as well. The real custom pools that Paddock built had an 1.5” flange fitting mid way on the pool about 12” below the surface for a home owner to actually vacuums their pools using a portable vacuum hose and head. At this same time we also have the Pool Master Jet Vac pool cleaner that hooked on the end of your garden hose and blew water into a large bag that could pick up leaves and not plug up the pump basket. The bag were designed to filter the water jetting up into the bag along with some dirt.
These types of cleaning systems were designed to help keep the pool somewhat clean. The reality was that once you built a pool, you had to contend with the drudgery of cleaning your pool every weekend or be rich enough to afford a pool maintenance company. This need for keeping the pool clean has spawned an entire section of our industry and it came about more by chance then anything else.
It was the late 50’s and early 60’s that one of the Pillars of our industry, Andy Pansini was just finishing up cleaning his pool using his vacuum cleaner on his pool in San Rafael area in the SF Bay Area. Andy was cleaning his decks after cleaning his pool and was using his garden hose to hose things down. The phone rang and Andy dropped his hose in the pool and answered the phone. When he returned, the hose had been snaking back and forth on the bottom of the pool and the pool was spotless where the hose was whipping back and forth.
The History of the Pool Cleaner
It is said that “Necessity is the Mother of Invention”. Andy realized at that moment that if he could manage the whipping hose in his pool then he could chase the dirt down to the bottom of the pool and without ever vacuuming his pool again, he could always have a spotless pool. Andy solicited the help of a fellow inventor, Howard Arneson, that lived across the bay. Howard was a creator, inventor and part showman. The two of them came up with some interesting variations of these first prototypes. I was fortunate in the mid 60’s to actually work on one of the very first of these prototypes that looked nothing of what we see today of the robotic pool cleaner.
As time went on Andy and Howard both started their own manufacturing companies. Andy and his wife Jan had started Jandy and Howard started Pool Sweep. Both were here in the San Francisco Marin County area. As more and more backyard swimming pools were being built, there became more and more need to keep them clean so you could enjoy swimming in a nice clean pool. This need for a clean pool created a new part of our industry called pool service and maintenance companies. It was at this time I started my first pool company. After years of working for my Dad’s pool company, at 16 years old, I had my driver’s license and a truck to put my maintenance cleaning equipment and chemicals in.
I was one of the first pool service companies in our area and was fortunate enough to acquire some very high profile pools that I cleaned each week. Back in those days you didn’t have a self-cleaning pool like today, that you mostly test the water and add chemicals to, once a week. Back then every pool was on twice a week service with the first visit as a brush and skim the pool along with cleaning the basket and filter visit. The second cleaning was dedicated to vacuuming the pool so it was ready for the weekend entertaining.
It was at this time I learned a lot about the drudgery of cleaning and maintaining the backyard pool. Cleaning swimming pools gave me a great appreciation for what it took in the building end of a swimming pool to make it easier on our clients. Let’s face it, the reason people build a swimming pool is to relax, enjoy their leisure time in the backyard with family and friends. It is not to become a slave to the maintenance of your pool.
As the Jandy cleaner and the Arneson cleaner became more and more popular to adapt to a pool, I was seeing more and more builders first install a dedicated return line for the robotic sweep and eventually those same builders realized that upselling a client on the advantages of installing a robotic cleaner made owning a swimming more enjoyable for the homeowner. As the Jandy Porpoise and Arneson Pool Sweep was taking the industry by storm, an inventor/businessman, Jim Edmundson was creating his version of the pressure pool cleaner called the Polaris. The uniqueness of the Polaris was that it lived on the bottom of the pool and did both sweeping and vacuuming of the pool. It had a leaf bag much like the early Pool Master Jet Vac manual cleaner except that it was part of the robotic cleaner and only needed to be cleaned once a week. There was one more entrance into the robotic cleaners on the West coast and that was from Sandy Campbell, who was in the Bay Area as well but soon moved his manufacturing to Redding, California. Sandy’s cleaner was called “The Letro Jet Vac”, it had some of the similar characteristic as the Polaris but it did a better job in high leaf areas.
While all these robotic cleaner wars were going on in California, over in Arizona, in the late 60’s and early 70’s, they were creating their very own cleaning systems to help battle the high sand content and debris that was plaguing swimming pools in that market. As I stated earlier, “Necessity was the Mother of Invention”. The Ghiz Family (Paddock Pools, The Paramount System) and the Ast Family (Shasta Pools, The A&A System) both created their proprietary in-floor cleaners for their own pools in that market. They along with a friend of mine, Les Mathews (Creator of the Caretaker System). All of these three inventor families helped usher in the next generation of pool cleaning. There was one other little-known infloor cleaner called the “Turbo Clean” that I recall seeing on some of the Geremia Pools out of Sacramento, Ca. Within a few short years, these manufacturers were selling their cleaners all across the country and internationally.
For the past 40 years, I personally have designed and worked with all three cleaners. For the past 25 years, my favorite in-floor cleaner is the PCC-2000 cleaner. What is it that makes this cleaner so special to me is it’s ability to clean the entire pool as Paramount and our team design the location of the cleaner heads. PCC-2000 also has it’s patented water curtain and the MDX that is it’s debris collection system. The robotic cleaners have their advantages in that they are a low cost compared to the Paramount in-floor system. In addition, as the design of our pools have come a long way from my dad’s pioneering days of simple, functional designs with simple filtration and no cleaners, to the designs that my son, Nicco and I are creating today with baja entries, ledges and seats throughout the pool.
We are all seeing the acceptance of engineered pools hanging off slopes with vanishing edges and “O” edge designs. These pools are so artistic that a robotic cleaner with its umbilical cord running around pool will surely take away from the beauty and artistry of the pools we are designing and building today.
What the in-floor cleaner is to me and even more specifically the Paramount PCC-2000 in-floor cleaner, is the beauty of the pool is not interrupted with the visual of the robotic cleaner. The additional circulation on the bottom of the pool that takes water from the skimmer level of the water and injects it back into the floor heads. This action creates not only bottom circulation better then any other way to circulate water in your pool, but it also takes surfaced solar heated water and injects it to the bottom of the pool so the entire pool becomes a heat storage battery for the solar heat that is collected at the surface.
More and more today our pools here in the Bay Area are safety cover pools with the spa under the cover to help keep the pool safe from small children, clean from dirt falling in the pool and energy efficient because of the passive solar heat that the cover generates at the top of the water that is pumped to the bottom of the pool through the in-floor cleaning system. Not only are we delivering a very clean pool to our clients, but a very efficient pool that cleans itself and a very artistic pool that is exciting to look at.
Our industry has come a long way since I joined in with my dad and now with Nicco, my son as the 3rd generation of our family to build well-engineered, unique designed and very efficient works of art for our clients backyard enjoyment and entertainment. It has taken 3 generations for our family to build the “State of the Art” custom pools that Nicco is now building for our company. As I stood on my father’s shoulder, now Nicco stands on mine, our family tradition has continued to advance the pool industry with our knowledge and forward thinking. It has been a wonderful journey as we all get to enjoy the rich history of our industry that has taken us to where we are today. Those early pioneers helped pave the way for the next generation of pool builders.
I will continue to add to the rich history of the swimming pool industry with my personal stories that all of us will enjoy as we discover where our roots come from.
-
Pools3 weeks ago
This Pool Was Designed Specifically For a Lamborghini
-
Pool Builder4 weeks ago
Educating Customers About The Dark Side of the Pool Industry
-
Pool Builder4 weeks ago
Building Pools With Maintenance in Mind
-
Pool News4 weeks ago
Brad Holley’s Miami Vice-Inspired Design Wins Million Dollar Pool Challenge
-
Products3 weeks ago
Beatbot AquaSense Pro Pool Cleaner Review
-
Pool Service4 weeks ago
The Great Pool Debate
-
News3 weeks ago
Innovative Programs and Activations Announced for Coverings 2024
-
Pool Service3 weeks ago
Orenda (a HASA Company) and Skimmer to Revolutionize Pool Maintenance with New Partnership